Wagner's classic improved!

Now Available

Also available galvanized

3/8" Socket Headless Set Screw Cup End

Note: Both section to be joined must have the same wall thickness.

NEW! DOUBLE LOCK ONE PIECE SPLICE-LOCK™ FOR PIPE AND ROUND TUBING

Also available galvanized

3/8" Socket Headless Set Screw Cup End

Note: Both section to be joined must have the same wall thickness.

Single Piece Splice-Lock™ Assembly

1. Drill a 13/32" diameter hole for 3/8" screws – 3/8" to center from the end of the pipe or tube for Single Lock; .96" for Double Lock.
2. Insert splice-lock into this first section.
3. Insert and partially tighten the set screw.
4. Slide other section to be joined over the Splice-Lock. If you are using a double Splice- Lock, drill a 13/32" diameter hole in this other section as well and insert second set screw.
5. Complete tightening of the set screw(s) until no movement is possible.